document number: 94339 for technical ques tions, contact: diodes-tech@vishay.com www.vishay.com revision: 04-aug-08 1 input rectifier diode, 20 a 20ets..fppbf high voltage series vishay high power products description/features the 20ets..fppbf rectif ier high voltage series has been optimized for very low forward voltage drop, with moderate leakage. the glass passivation technology used has reliable operation up to 150 c junction temperature. typical applications are in input rectification and these products are designed to be used with vishay hpp switches and output rectifiers which are available in identical package outlines. fully isolated package (v ins = 2500 v rms ) is ul e78996 approved this product has been designed and qualified for industrial level and lead (pb)-free. product summary v f at 10 a < 1 v i fsm 300 a v rrm 800/1200 v anode 1 3 2 cathode base cathode to-220 full-pak a v aila b le rohs* compliant output current in typical applications applications single-phase bridge three-phase bridge units capacitive input filter t a = 55 c, t j = 125 c common heatsink of 1 c/w 18 22 a major ratings and characteristics symbol characteristics values units i f(av) sinusoidal waveform 20 a v rrm range 800/1200 v i fsm 300 a v f 10 a, t j = 25 c 1.0 v t j - 40 to 150 c voltage ratings part number v rrm , maximum peak reverse voltage v v rsm , maximum non-repetitive peak reverse voltage v i rrm at 150 c ma 20ets08fppbf 800 900 1 20ETS12FPPBF 1200 1300 absolute maximum ratings parameter symbol test conditions values units maximum average forward current i f(av) t c = 51 c, 180 conduction half sine wave 20 a maximum peak one cycle non-repetitive surge current i fsm 10 ms sine pulse, rated v rrm applied 250 10 ms sine pulse, no voltage reapplied 300 maximum i 2 t for fusing i 2 t 10 ms sine pulse, rated v rrm applied 316 a 2 s 10 ms sine pulse, no voltage reapplied 442 maximum i 2 t for fusing i 2 t t = 0.1 to 10 ms, no voltage reapplied 4420 a 2 s * pb containing terminations are not rohs compliant, exemptions may apply
www.vishay.com for technical questi ons, contact: diodes-tech@vishay.com document number: 94339 2 revision: 04-aug-08 20ets..fppbf high voltage series vishay high power products input rectifier diode, 20 a electrical specifications parameter symbol test conditions values units maximum forward voltage drop v fm 20 a, t j = 25 c 1.1 v forward slope resistance r t t j = 150 c 10.4 m threshold voltage v f(to) 0.85 v maximum reverse leakage current i rm t j = 25 c v r = rated v rrm 0.1 ma t j = 150 c 1.0 thermal - mechanical specifications parameter symbol test conditions values units maximum junction and storage temperature range t j , t stg - 40 to 150 c maximum thermal resistance, junction to case r thjc dc operation 2.8 c/w maximum thermal resistance, junction to ambient r thja 62 typical thermal resistance, case to heatsink r thcs mounting surface, smooth and greased 0.5 approximate weight 2g 0.07 oz. mounting torque minimum 6.0 (5.0) kgf cm (lbf in) maximum 12 (10) marking device case style to-220 full-pak (94/v0) 20ets08fp 20ets12fp
document number: 94339 for technical ques tions, contact: diodes-tech@vishay.com www.vishay.com revision: 04-aug-08 3 20ets..fppbf high voltage series input rectifier diode, 20 a vishay high power products fig. 1 - current rating characteristics fig. 2 - current rating characteristics fig. 3 - forward power loss characteristics fig. 4 - forward power loss characteristics fig. 5 - maximum non-repetitive surge current fig. 6 - maximum non-repetitive surge current 100 125 150 75 50 25 maximum allowable case temperature (c) avera g e forward current (a) 24 20 16 12 0 8 4 cond u ction angle ? 20ets.. series 1 8 0 120 90 60 30 75 100 125 150 50 25 maximum allowable case temperature (c) avera g e forward current (a) 35 30 25 20 15 10 5 0 360 1 8 0 120 90 60 30 20ets.. series ? cond u ction period 5 0 25 20 15 10 30 maximum avera g e forward power loss (w) avera g e forward current (a) 24 20 16 12 8 4 0 rms limit 1 8 0 120 90 60 30 20ets.. series t j = 150 c cond u ction angle ? 5 30 25 20 15 10 0 35 maximum avera g e forward power loss (w) avera g e forward current (a) 5 15 25 20 10 0 20ets.. series t j = 150 c ? cond u ction period dc 1 8 0 120 90 60 30 rms limit 50 300 200 250 150 100 peak half sine wave forward current (a) number of equal amplitude half cycle current pulses (n) 10 100 1 20ets.. series at any rated load condition and w ith rated v rrm applied follo w ing s u rge. initial t j = 150 c at 60 hz 0.00 8 3 s at 50 hz 0.0100 s 50 300 250 200 150 100 peak half sine wave forward current (a) pulse train duration (s) 0.1 1 0.01 20ets.. series maxim u m non-repetiti v e s u rge c u rrent v ers u s p u lse train d u ration. initial t j = 150 c n o v oltage reapplied rated v rrm reapplied
www.vishay.com for technical questi ons, contact: diodes-tech@vishay.com document number: 94339 4 revision: 04-aug-08 20ets..fppbf high voltage series vishay high power products input rectifier diode, 20 a fig. 7 - forward voltage drop characteristics fig. 8 - thermal impedance z thjc characteristics 1 100 10 1000 i f - instantaneous forward current (a) instantaneous forward volta g e (v) 3.5 3.0 2.5 2.0 1.5 1.0 0.5 4.0 0 t j = 25 c t j = 150 c 20ets.. series 0.1 1 10 0.0001 0.001 0.01 0.1 1 10 100 square wave pulse duration (s) z thjc - transient thermal impedance (c/w) 20ets.. series single p u lse (thermal resistance) d = 0.50 d = 0.33 d = 0.25 d = 0.17 d = 0.0 8
document number: 94339 for technical ques tions, contact: diodes-tech@vishay.com www.vishay.com revision: 04-aug-08 5 20ets..fppbf high voltage series input rectifier diode, 20 a vishay high power products ordering information table 1 - current rating (20 = 20 a) 2 - circuit configuration: 3 - package: t = to-220 full-pak 4 - type of silicon: s = standard recovery rectifier 5 - voltage ratings 6 - 7 - none = standard production pbf = lead (pb)-free e = single diode 08 = 800 v 12 = 1200 v device code 5 13 24 67 20 e t s 12 fp pbf links to related documents dimensions http://www.vishay.com/doc?95005 part marking information http://www.vishay.com/doc?95009
outline dimensions www.vishay.com vishay semiconductors revision: 20-jul-11 1 document number: 95005 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 dimensions in millimeters 5 0.5 3.3 3.1 5 0.5 0.9 0.7 2.54 typ. 2.54 typ. 10.6 10.4 3.7 3.2 7.31 6.91 0.61 0.38 2.85 2.65 2.8 2.6 1.4 1.3 10 4.8 4.6 16.0 15.8 16.4 15.4 (2 places) r 0.7 r 0.5 hole ? 3.4 3.1 typ. 1.15 1.05 13.56 13.05 lead assignments diode s 1 + 2 - cathode 3 - anode conforms to jedec outline to-220 full-pak
document number: 91 000 www.vishay.com revision: 11-mar-11 1 disclaimer legal disclaimer notice vishay all product, product specifications and data ar e subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectivel y, vishay), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicab le law, vishay disc laims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, incl uding without limitation specia l, consequential or incidental dama ges, and (iii) any and all impl ied warranties, including warran ties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of pro ducts for certain types of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in gene ric applications. such statements are not binding statements about the suitability of products for a partic ular application. it is the customers responsibility to validate that a particu lar product with the properties described in th e product specification is su itable for use in a particul ar application. parameters provided in datasheets an d/or specifications may vary in different applications and perfo rmance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vishays term s and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vishay product co uld result in person al injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk and agr ee to fully indemnify and hold vishay and it s distributors harmless from and against an y and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that vis hay or its distributor was negligent regarding the design or manufact ure of the part. please contact authorized vishay personnel t o obtain written terms and conditions regarding products designed fo r such applications. no license, express or implied, by estoppel or otherwise, to any intelle ctual property rights is gran ted by this document or by any conduct of vishay. product names and markings noted herein may be trademarks of their respective owners.
|
